WalkieStackers.com Logo Top Curve
Presented By Solution Dynamics, Inc. 1-877-860-3620
location :: home : big joe : cb

Big Joe CB

Big Joe CB

Big Joe CB Medium Duty Counter Balanced Stackers

Big Joe's CB series of medium duty counterbalanced stackers have a capacity of 2,200 & 3,300 lbs and are available with lift heights of 104" to 157".

Standard Equipment Includes:
  • Regenerative Neutral Braking
  • Gas Assist Spring Handle
  • Low Battery Interrupt
  • Hour Meter BDI Combo Gauge
  • Key Switch
  • 35" Tall Load Backrest
Ships From:
US Map Wisconsin
Made By:
Big Joe Logo
Request Quote
CB Medium Duty Counterbalanced Stackers
LiftColExt w/LBRLoadedUnloaded
CB22-1042,200 lbs24"104"72.3"143"6"Telescopic42" x 4"8" - 28"106" x 35.8"5%8%4,305 lbsQuote
CB22-1282,200 lbs24"128"83.2"165"6"Telescopic42" x 4"8" - 28"106" x 35.8"5%8%4,382 lbsQuote
CB33-1043,300 lbs24"105"72.0"139"6"Two Stage42" x 4"8" - 28"113" x 35.5"5%8%4,690 lbsQuote
CB33-1263,300 lbs24"126"83.0"161"6"Two Stage42" x 4"8" - 28"113" x 35.5"5%8%4,995 lbsQuote
CB33-1573,300 lbs24"157"72.0"192"50"Triple Stage42" x 4"8" - 28"113" x 35.5"5%8%4,690 lbsQuote

Note: Derate capacity 500 lbs. above 132".
  • HYDRAULICS - Lift cylinder is hard chrome. Pump unit includes motor, gear pump, and solenoid. Pressure compensated lowering valves regulates lowering speeds.

  • ELECTRICAL - ZAPI AC travel controller and AC drive motor provides high torque throughout the entire drive range. Regenerative braking and brushless design drastically reduces maintenance. Travel speed remains constant relative to throttle position regardless of the load on truck. Automatic resetting circuit breaker and one piece micro switch design complete the system.

  • BRAKES - Electromagnetic brake is mounted on motor armature shaft multiplying the braking power through the ZF GK20 transmission. Brake is applied when control arm is in the vertical or horizontal handle position. Travel speed is reduced when forks are above 12" fork height. Neutral braking resists roll back on ramps.

  • CONTROLS - Travel, lift, lower and tilt functions are located in the ergonomic operator handle, designed to allow operation with either hand. Wrap around guard, reversing switch, thumb control, and horn are standard.
  • TRANSMISSION - Vertically mounted drive motor is direct mounted to gear housing. Oil bathed ZF GK10 hypoid bevel gear drive-train transfers power to axle. State of the art optimized gear technology supplies advantages such as minimal envelope circle, zero maintenance, low noise level, high efficiency and high performance.

  • FRAME AND MAST - Bolt-on high visibility I-beam construction, lift cylinders are positioned in outer I-beam for good operator visibility through mast. Dual lifting chains Class two ITA fork carriage with 36" tall load back rest.

  • BEARINGS - DRIVE WHEEL - Tapered roller bearings sealed in oil bath. LOAD WHEELS - Sealed ball bearings.

  • ACCESSIBLITY - Removal of two piece power head cover exposes major components for inspection and maintenance. Drive wheel is removed with one nut.
Related Product Lines
Presto PPS-CB
Presto PPS-CB Type:Counterbalanced
Capacity:1,100 lbs
Lift Height:62"
Fork Length:30"
Fork OD:6.3" - 23.6"
Load Center:15"
Big Joe PDC
Big Joe PDC Type:Counterbalanced
Capacity:1,500 - 4,000 lbs
Lift Height:60" - 194"
Fork Length:36" - 48"
Fork OD:8" - 32"
Load Center:24"
Presto CW
Presto CW Type:Counterbalanced
Capacity:200 - 1,000 lbs
Lift Height:62" - 74"
Fork Length:25" - 30"
Fork OD:6.5" - 20"
Load Center:13" - 15"
Big Joe PDS25
Big Joe PDS25 Type:Straddle
Capacity:2,500 lbs
Lift Height:106" - 157"
Fork Length:36" - 48"
Straddle OD:44" - 56"
Load Center:24"
Application Help
Call 877-860-3620 & tell us your requirements or Email Us
Quick Quote
Let us know your specifications and we'll email you Request Quote
Solution Dynamics, Inc. BBB Business Review
Copyright 2021 Solution Dynamics, Inc | Toll Free: 877-860-3620 | Phone: 262-521-5730 | Fax: 262-521-5733 | Email Us